Pick a trade and state to see real hourly rates.
Career guide · Iowa
How to Become a Rigger in Iowa
Learn load handling through Iowa apprenticeship, college labs and rigging study, then build experience with supervised lifts.
About this Guide
Rigging work starts with the load: its weight, balance, attachment points and path to the landing area. This guide connects Iowa training routes with construction duties, including sling inspection, hitch selection and load control. It explains what employers must assess before assigning lifts and where broader equipment or maintenance training can support your entry into rigging.
Who's hiring riggers in Iowa
Iowa · this weekEmployers across Iowa are hiring riggers right now
A good share of those postings are open to people at entry level with no licence yet. Live counts move week to week — the training routes below do not.
Rigger skill levels in Iowa
The trade is not one job, it is three, and they are separated by what you are legally allowed to do rather than by how good you are. Knowing which level you are aiming at tells you which hours, which exam and which certificates actually matter.
AWhere you startApprentice Rigger0–2 years0 – 4,000 supervised hours
Paid from day one, working under a licensed hand while you bank the hours that lead to your own card.
- ✓Material handling, layout and site preparation
- ✓Basic installation work under supervision
- ✓Tool and equipment staging for the crew
- ✓Clean-down, housekeeping and site safety tasks
- ✕Can't work unsupervised on anything the state licenses
- ✕Can't pull permits or sign inspection paperwork
JThe main goalJourneyman Rigger4–8 years8,000 supervised hours + exam
Qualified to work on your own. This is the level nearly every job ad is really asking for, and the biggest pay step you will ever get.
- ✓Install and troubleshoot without supervision
- ✓Read and build from drawings without constant clarification
- ✓Take responsibility for your own work at inspection
- ✓Direct one to three apprentices on a task
- ✕Can't pull permits in your own name in most states
- ✕Can't act as licence-holder of record across sites
MWhere it leadsMaster / Lead Rigger8+ years12,000 hours + time at journey level
You run work rather than just do it: crews across sites, permits where the trade allows, and the option of qualifying a business of your own.
- ✓Run crews across more than one site
- ✓Own compliance and inspection outcomes
- ✓Estimate and scope packages of work
- ✓Train and sign off the people below you
- ✕Still can't trade as a business without a contractor licence, insurance and usually a bond
What does a rigger earn in Iowa?
Riggers in Iowa start around $20.69 an hour and reach $34.52 at the top of the trade. Once you are working unsupervised the middle of the market sits near $30.
What you're legally required to have
Iowa has no rigger license. Employees need task qualification. Construction businesses register with DIAL at $2,000 annual construction earnings. Employers assess rigging ability and provide hazard instruction under Iowa OSHA's adopted standards.
Licence & registrationMust haveGet this wrong and the hours you work may not count toward your licence.0 / 3
Safety trainingMust haveWithout these you won't get through the gate on most sites.0 / 3
Working legally & getting paidMust haveKnow your status before you start — it decides your tax and your cover.0 / 3
Site access & practicalSite-drivenDriven by the site you are sent to rather than by law, but they still stop a start date.0 / 3
Where to train as a rigger in Iowa
Local 234 combines equipment practice with apprenticeship work. Kirkwood adds maintenance labs and lifting skills. Online specialist study develops rigging calculations, hardware knowledge and communication alongside supervised experience handling real loads.
IUOE Local 234
Kirkwood Community College
Industrial Training International
What recruiters actually look for
Certificates get you past the first filter. These are the things foremen and recruiters decide on, and they change depending on which level you are applying at.
Qualities that get you hired
What holds people back
No signed record of your supervised hours
Long gaps with no explanation at all
Leaving three or four shops inside a year
No OSHA card when the site requires one
Certifications that lapsed and were never renewed
Listing a licence as 'in progress' as though it is held
No supervisor anyone can call
From no experience to hired
The realistic route, start to finish. Most of it is paid — you are earning from the point you are taken on, not from the point you are licensed.
Decide and enrol
Get taken on as an apprentice
Bank your supervised hours
Sit the licence exam
Get hired at journey rate
Certifications that pay off
Sorted by payback speed.
| Certification | Rate bump | Extra / year | Cost | Payback |
|---|---|---|---|---|
| OSHA 30-Hour Construction | +$1.53 | $3,182 | $159 | 3 weeks |
| OSHA 10-Hour Construction | +$0.51 | $1,061 | $59 | 3 weeks |
| Aerial/Scissor Lift (MEWP) Operator | +$0.13 | $270 | $59 | 12 weeks |
| NCCCO Signalperson | +$0.41 | $853 | $225 | 14 weeks |
| NCCER Certified Signal Person (IAMU, Ankeny) | +$0.41 | $853 | $270 | 17 weeks |
| NCCCO Rigger Level I | +$1.23 | $2,558 | $1,750 | 36 weeks |
Questions people ask
When does an Iowa crane assembly crew need a qualified rigger?▾
Which rigger level fits harder Iowa lifting jobs?▾
Can an Iowa rigger use a sling with an unreadable load tag?▾
Start Your Rigger Career in Iowa
Build a free profile and get matched with verified employers.
Current BLS Iowa employee wages for Riggers, SOC 49-9096; wages cover industries statewide and exclude premium pay and benefits.
Last updated November 18, 2026. Rates are market estimates, not guarantees.